Wooden cladding for above-ground pools
Got an above-ground pool and want to hide the liner? We make a wooden slat cladding to measure in our workshop in Sant Vicenç dels Horts (Baix Llobregat) and install it anywhere in the province of Barcelona. Your pool looks built-in, and you can still take it down.
Send us photos of your pool on WhatsApp
We reply the same day. Prefer email? Write to us at hola@yaocreations.com.
Choose your version
Prices from, installed and VAT included. We give you the final fixed price after measuring your pool.
Tap a photo to see it full size.






Design images, made from our plans. Made to order.
Price by pool size
Installed and VAT included, up to about 40 km from the workshop, with 3 lockable doors on the full and 4-side versions, and 1 on the front.
| Pool | Full (100% covered) | All 4 sides, no cap | Front only |
|---|---|---|---|
| Rectangular 4.04 × 2.01 m, 1.00 m high | €7620 | €4800 | €2130 |
| Round Ø 3.66 m, 1.22 m high * | €7840 | €5060 | €2460 |
| Rectangular 4.88 × 2.44 m, 1.22 m high | €8980 | €5660 | €2420 |
| Round Ø 4.88 m, 1.22 m high * | €9540 | €6010 | €2820 |
| Rectangular 5.49 × 2.74 m, 1.22 m high | €9720 | €6090 | €2570 |
| Rectangular 7.32 × 3.66 m, 1.32 m high | €12210 | €7640 | €3070 |
* Round pools: estimated price, to be confirmed when measuring. Workshop hours are estimates until the first cladding is built. Not included: the pool, the filter pump, electrical work or the town hall permit.
A real example: our own pool, a 5.49 × 2.74 m Bestway Power Steel, with the front stepping down a level and the filter pump in a corner with its own door, without the cap, comes to €5660, with the full count of materials and hours.
How it’s built
- A bolted galvanised steel tube frame on adjustable feet, standing on its own about 45 cm from the pool.
- Vertical pressure-treated pine slats, about 9.5 cm wide, ending just below the pool edge.
- No rails on the outside, so it can’t be used as a ladder.
- On the full version, a cap of boards sloping at about 25° covers the pool edge, the frame and the liner.
- Lockable doors made of the same slats for the valves and the ladder.
- The filter pump stays outside; the hoses run under the slats.
- Made of bolted modules: it can be taken down.
What’s included
- The measuring visit.
- Galvanised steel frame, pressure-treated pine slats and A4 stainless steel screws.
- Two coats of wood stain.
- Lockable doors.
- The cap, on the full version.
- Travel and installation.
How we work
Send us photos and the model
On WhatsApp or by email: the pool, the space around it and where your filter pump is. With the model or the measurements.
We come to measure
We measure the pool full of water, the valves, the ladder and the ground. We talk about which sides you want clad.
Fixed price
We give you the fixed price and the installation date, in writing and with no commitment. That price doesn’t change.
We prepare it in the workshop
We cut the steel and the wood, build the modules and protect every piece with two coats of wood stain.
We install it
In 1 to 6 days, depending on the size and the version. When we finish, we check it over with you.
Where we work
We install all over the province of Barcelona: Baix Llobregat (Sant Vicenç dels Horts, Molins de Rei, Sant Feliu de Llobregat, Sant Boi, Castelldefels, Gavà…), Barcelona city and the rest of the province.
See also wooden pergolas for shade by the pool and our workshop.
Frequently asked questions
How much does it cost to clad an above-ground pool in wood?
The full cladding, which also covers the edge, costs from €7620 (4 × 2 m rectangular pool). All 4 sides without the cap from €4800, and the front only from €2130, installed and VAT included. The table shows the most common sizes. Every garden is different, so after seeing it we give you a fixed price.
Will it fit my pool?
It fits steel-frame above-ground pools, rectangular or round, such as Bestway Power Steel or Intex Ultra XTR, 1 m high or more. Send us the model or the measurements and we’ll tell you.
Does the cladding touch the pool?
No. It’s a freestanding structure about 45 cm from the pool wall. It doesn’t rest on the liner, the legs or the top rail, so it doesn’t affect the pool or its warranty.
What is the cap?
A cover of wooden boards, sloping at about 25°, that runs from the slats to the pool edge. It hides the gap, the frame and the liner, so you only see the water. It slopes so it isn’t used as a seat or a diving board.
How do I reach the valves and the ladder?
Through lockable doors made of the same slats: one in front of the valves and one where the pool ladder goes. The filter pump stays outside, wherever you have it, and the hoses run under the slats.
What wood do you use?
Pressure-treated pine for outdoor use, on a bolted galvanised steel tube frame, with A4 stainless steel screws and two coats of wood stain. The slats sit about 6 cm off the ground so the water doesn’t reach them.
Can it be taken down in winter?
Yes. It’s made of modules bolted together, so it can be taken down if you remove the pool one year.
Is it a child safety fence?
No. The slats are vertical with no rails on the outside, so they can’t be used as a ladder, but the cladding is not a safety fence and doesn’t replace adult supervision.
What about a deck to get into the pool?
We make it on request: a deck level with the pool edge, with a 90 cm railing and steps. Before quoting we study it in your garden, because it depends on the ground, the space and your town’s permits.
Do I need a permit from the town hall?
It depends on the town. We help you find out what you need, but the paperwork isn’t included in the price.
How long does installation take?
Without the cap, 1 to 3 days at your home; the full cladding, 4 to 6 days, depending on the size. Before that, we prepare and protect every piece in the workshop.
Is the pool included?
No. You provide the pool (if you don’t have one yet, we tell you which models fit best) and we make and install the cladding.
Got an idea? Let’s make it together.
Tell us what you need and we’ll send you a sketch and a quote, no strings attached.