Skip to content
YAO ES
Guide

How do you clad an above-ground pool with wood?

Checked on 20/11/2026 against the Bestway and Intex manuals. It applies to steel-frame above-ground pools, such as Bestway Power Steel or Intex Ultra XTR.

Updated: 20/11/2026 · YAO, woodworking workshop in Barcelona

The short answer

You can clad it with wood, but the cladding has to stand on its own: without touching the liner, the legs or the top rail of the pool. It needs space all round, doors to reach the valves, the filter pump outside and slats a child can't climb. Made to measure and installed, ours costs from €2130 (the front only of a 4 × 2 m pool) to €12210 (full cladding of a 7.32 × 3.66 m pool), VAT included.

Before you start: measure the pool full of water

The catalogue measurements aren't enough. Measure with the pool full, because filling it makes the wall and the frame lean slightly inwards, as the Intex manual warns.

  • How far the legs stick out past the top rail. No manual says. According to shop listings, about 22 cm on the 5.49 m Bestway Power Steel and about 28 cm on the Intex Ultra XTR. On our own 5.49 × 2.74 m Bestway Power Steel we measured 40 cm.
  • Where the valves are and how high. Intex puts them on a short side; Bestway doesn't say which. On ours, the higher one is about 100 cm off the ground.
  • Where you get into the water and where the ladder goes.
  • Where the filter pump and the socket are.
  • The ground: whether it's level, and whether it's grass, soil or concrete.

The rules so you don't damage the pool

  • It mustn't touch the pool. The cladding is a separate structure, with its own feet on the ground. If it rubs the liner, wears it or punctures it, the warranty won't cover it: Intex excludes punctures, abrasion and alterations it hasn't authorised.
  • Leave clearance. Outside the legs, at least another 10–15 cm. We leave about 45 cm from the pool wall.
  • Don't put the pool on a deck. Bestway and Intex say not to set it up on decks or platforms: the pool goes on firm, level ground, and the wood goes around it.
  • Keep the wood off the ground by about 5–6 cm, so it doesn't sit in rainwater or splashes.
  • Fit doors for the valves and the ladder. You need to be able to close the valves, clean the filter and empty the pool without taking anything apart.
  • Keep the filter pump outside. The Bestway and Intex filter pump manuals say to place it 3.5 m or more from the pool, and the socket more than 4 m away. Don't hide it in a bench or box right next to the pool. The hoses can run under the slats.
  • Make it removable, with bolted modules, in case one year you take the pool down.

Which wood to use

  • Pressure-treated pine for outdoor use. It's the usual choice for outdoors next to water. With a wood stain, it keeps its colour.
  • Stainless steel screws. Ordinary ones rust and stain the wood.
  • Never leave OSB on show. Even the outdoor grade (OSB/3) is made for damp conditions, not for direct rain and splashes.
  • The frame: we build it from bolted galvanised steel tube with adjustable feet, so it can be levelled on any garden's ground.

Child safety

Badly designed cladding can make it easier for a child to get into the pool. Intex asks for nothing a child could climb on within 1.22 m of the pool, and Bestway recommends placing the pool away from such objects. So:

  • Vertical slats, with no rails or ledges on the outside.
  • No flat edge to sit or stand on. If you want to cover the pool edge, make the cover slope.
  • Take the ladder away, or lock it, when nobody is swimming.

Cladding is not a safety fence. Nothing replaces adult supervision.

Three ways to get a “wooden” pool

OptionApproximate priceForAgainst
Clad it yourselfMaterials: about €600–900 in pressure-treated pine and galvanised tube for a 4 to 5.5 m pool (Obramat prices, 11/11/2026)The cheapestThe hours, the tools and the rules above are up to you
Swap it for a steel pool with a wood lookGre Pacific: from €1070 (2.40 m round) to €2399 (7.30 × 3.75 m oval), at Poolspasonline (checked on 20/11/2026)No maintenanceIt's printed steel, not wood, and you have to buy another pool
Swap it for a wooden kit poolGre: from €2049 (2.95 m hexagonal) to €8499 (6.2 × 4.3 m rectangular), at Leroy Merlin (checked on 11/11/2026), not installedReal woodIt needs a concrete slab, paid separately, and you have to buy another pool
Have it clad to measure by usFrom €2130 for the front only, from €4800 for all 4 sides and from €7620 for full cladding, installed and VAT includedYou keep your pool, made to fit your gardenIt costs more than doing it yourself

Our prices by pool size

PoolFull (100% covered)All 4 sides, no capFront only
Rectangular 4.04 × 2.01 m, 1.00 m high€7620€4800€2130
Round Ø 3.66 m, 1.22 m high *€7840€5060€2460
Rectangular 4.88 × 2.44 m, 1.22 m high€8980€5660€2420
Round Ø 4.88 m, 1.22 m high *€9540€6010€2820
Rectangular 5.49 × 2.74 m, 1.22 m high€9720€6090€2570
Rectangular 7.32 × 3.66 m, 1.32 m high€12210€7640€3070

Installed and VAT included, up to about 40 km from our workshop in Sant Vicenç dels Horts (Barcelona). * Round pools: estimated price, to be confirmed when measuring. Not included: the pool, the filter pump or the town hall permit. Full details on wooden cladding for above-ground pools.

Do you need a permit?

It depends on the town hall. Some local bylaws deal with above-ground pools separately, and if the installation becomes permanent (sunk into the ground, on concrete footings or with a fixed deck) it can count as building work, with its own paperwork. Freestanding, removable cladding makes things easier, but ask your town hall first.

See also: wooden cladding for above-ground pools · wooden pergolas

FAQ

Can you clad an Intex or Bestway pool with wood?

Yes, as long as the cladding stands on its own and doesn't touch the liner, the legs or the top rail. It works for steel-frame pools, rectangular or round.

Will I lose the pool warranty?

Cladding that doesn't touch the pool doesn't alter it. But if the wood rubs the liner and damages it, the warranty won't cover that damage: that's why you need clearance.

How much clearance do I need?

Outside the legs, at least another 10–15 cm. Measure with the pool full: the legs stick out about 22 to 40 cm depending on the model, and the frame moves as it fills. We leave about 45 cm from the wall.

Can I put the filter pump inside the cladding?

Not right next to the pool: the manuals say 3.5 m or more, and the socket more than 4 m away. If you want to hide it, use a separate housing at that distance.

How much does it cost to clad an above-ground pool?

Doing it yourself, about €600–900 in materials. With us, installed and VAT included, from €2130 for the front only, from €4800 for all 4 sides and from €7620 for full cladding, depending on the size.

Can I add a deck to get into the pool?

Yes, but without putting the pool on it: the deck goes around the pool, with a railing and steps that can be locked. We build it on request, after seeing the garden, because it depends on the ground, the space and the permits.

Sources

Got an idea? Let’s make it together.

Tell us what you need and we’ll send you a sketch and a quote, no strings attached.

Message us on WhatsApp